更多
首页 -- 变形缝安装施工事项 -- 如何正确处理变形缝漏水问题
如何正确处理变形缝漏水问题

不管在任何建筑都会用到变形缝,如果在前期安装变形缝时处理的不好后请就会有一定问题,例如漏水,那变形缝如果漏水怎么办,应该怎么正确处理变形缝漏水的现象呢?成都万兴恒达变形缝有限公司就为你提供了几点,来正确处理变形缝漏水的现象。
No matter in any building will use deformation cracks, if processing is not good when the deformation joint in the early stage of the installation after please will have some problems, such as leaks, that what if leaking, deformed joints should be how to correctly handle the phenomenon of deformation joint leakage?
Chengdu Wan Xing hengda co., LTD. Will provide you with some deformed joints, to correctly handle the deformation seam leakage phenomenon.
变形缝漏水处理方法
Deformation seam leakage treatment
1、原采用弹性材料嵌缝的变形缝,应清除缝内已失效的嵌缝材料及浮灰、杂物,缝壁干燥后设置背衬材料,分层嵌填密封材料。密封材料与缝壁应粘牢封严。
1, the former USES the elastic deformation of the sealing material seam, should remove failed in seam sealing materials and float ash, sundry, seam wall dry after setting the backing material, layered filling sealing material.
Sealing material and seam wall should be cement seal.
2、原采用金属折板盖缝的变形缝,应更换已锈蚀损坏的金属折板,折板应顺水流方向搭接,搭接长度不应小于40㎜。金属折板应做好防锈处理后锚固在砖墙上,螺钉眼宜用与金属折板颜色相近的密封材料嵌填、密封。
2, used in metal deformation of the folded plate cover joint seam, should be replaced has folded plate corrosion damage of metal, folded plate should be smooth flow direction lap, lap length should be not less than 40 ㎜.
Folding metal plate should be ready to anchor on the brick wall after antirust processing, screw eye appropriate is used close to metal folded plate color sealing material filling, sealing.

关于我们 | 联系我们 | 设为主页 | 加入收藏